Sodium Butyrate SDS GHS, MSDS Sheet of Manufacturers

Anmol Chemicals is the pioneer manufacturers of Sodium Butyrate, Pharmaceutical Excipients Fragrance Food & Flavor chemicals in India. We offer Halal and Kosher Sodium Butyrate made in an ISO9001, ISO22000 (FSSC22000) cGMP and GLP certified facility. Our group has several manufacturing facilities spread across the world, supported by toll manufacturers and representatives in UAE, Europe, Africa, USA, China and has several associated manufacturing facilities spread across India. All the Information on Physics, Chemistry, Applications, Uses and Technology on Manufacture of Sodium Butyrate is in these pages.

The units have one or more of the certifications like FDA GMP, ISO 9001, ISO 22000, HACCP, REACH, Kosher & Halal

Sodium Butyrate SDS GHS, MSDS Sheet

Synonyms: Sodium Butyrate; Sodium Butanoate; Butyric Acid Sodium Salt.
CAS Number 156-54-7
EINECS EC Number: 205-857-6
Molecular Weight: 110.09
Chemical Formula: CH3CH2CH2COOHNa
SUPPLIER
Company: Finoric LLC
Address: 8115 Loop 540, Beasley, Texas, 77417 USA
In case of emergency contact:
InfoTrac
US: 1-800-535-5053
International: 352-323-3500

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008

Skin corrosion/irritation Category 2
Serious eye damage/eye irritation Category 2A
Specific target organ toxicity, single exposure; Respiratory tract irritation Category 3
Germ cell mutagenicity Category 2
Labeling according to GHS & Regulation (EC) No 1272/2008

Hazard statements:
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H335 May cause respiratory irritation.
H341 Suspected of causing genetic defects.

Precautionary statements: P308+P313, P405, P501
P202: Do not handle until all safety precautions have been read and understood.
P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
P264: Wash … thoroughly after handling.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P281: Use personal protective equipment as required.
P302+P352 - IF ON SKIN: Wash with plenty of soap and water.
P303+P361+P353 - IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
P332+313: If skin irritation occurs: Get medical advice/attention.
P304 + P340 - IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P308+313: IF exposed or concerned: Get medical advice/attention.
P337+313: If eye irritation persists get medical advice/attention.
P405: Store locked up.
P501: Dispose of contents/container in accordance with local/regional/national/international regulations.

Classification according to EU Directives 67/548/EEC or 1999/45/EC:
Xn Harmful
R36/37/38, R68
For the full text of the H-statements & R-phrases mentioned in this Section, see Section 16.

Ingredient: Sodium Butyrate or Butyric Acid, Sodium Salt
CAS No.: 156-54-7
EINECS EC Number: 205-857-6
Percent: 90 - 100%

Inhalation: If Sodium Butyrate is inhaled, remove to fresh air. If breathing is difficult, give oxygen. Get medical attention.
Ingestion: Give large amounts of water to drink. Never give anything by mouth to an unconscious person. Get medical attention.
Skin Contact: In case of contact, immediately flush skin with plenty of water. Cover the irritated skin with an emollient. Remove contaminated clothing and shoes. Cold water may be used. Wash clothing & Shoes before reuse. Get medical attention.
Eye Contact: Check for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Cold water may be used. Get medical attention.

Fire: Sodium Butyrate is not expected to be a fire hazard.
Explosion: No information found.
Fire Extinguishing Media: Use any means suitable for extinguishing surrounding fire.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode.

Small Spill: Use appropriate tools to put the spilled solid in a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and dispose of according to legal requirements.
Large Spill: Use a shovel to put the material into a convenient waste disposal container. Finish cleaning by spreading water.

Keep Sodium Butyrate in a tightly closed container, stored in a cool, dry, ventilated area. Protect against physical damage. Containers of Sodium Butyrate may be hazardous when empty since they retain product residues (dust, solids); observe all warnings and precautions listed for the product.

Airborne Exposure Limits: None established.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to the substance is apparent, consult an industrial hygienist. For emergencies, or instances where the exposure levels are not known, use a full-face piece positive-pressure, air-supplied respirator. WARNING: Air purifying respirators do not protect workers in oxygen-deficient atmospheres.
Skin Protection: Wear impervious protective clothing, including boots, gloves, lab coat, apron or coveralls, as appropriate, to prevent skin contact.
Eye Protection: Use chemical safety goggles and/or a full face shield where splashing is possible. Maintain eye wash fountain and quick-drench facilities in work area.

Appearance: Sodium Butyrate is white to off-white powder.
Odor: Light odor.
Solubility: Appreciable (> 10%)
Specific Gravity: 0.96
pH: No information found.
% Volatiles by volume @ 21C (70F): 0
Boiling Point: No information found.
Melting Point: No information found.

Stability: Sodium Butyrate is stable under ordinary conditions of use and storage.
Hazardous Decomposition Products: Carbon dioxide and carbon monoxide may form when heated to decomposition. Toxic fumes of the contained metal may be released when heated to decomposition.
Hazardous Polymerization: Will not occur.
Incompatibilities: Strong acids.
Conditions to Avoid: Incompatibles.

Carcinogenic Effects: Not a reported carcinogen by IARC NTP ACGIH OSHA.
Teratogenic Effects: Not available.
Developmental Toxicity: Not available.

Toxicity to fish: LC50 - Lepomis macrochirus - 5.000 mg/l - 24 h
Toxicity to daphnia & other aquatic invertebrates: EC50 - Daphnia magna (Water flea) - 1.950 mg/l - 24 h
Results of PBT and vPvB assessment: This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.

Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing, use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused contents in accordance with federal, state and local requirements.

DOT (USA) & ADR/RID
Not regulated.
IMDG
Not dangerous goods
IATA
Not dangerous goods

USA:
TSCA 8(b) inventory: Butyric Acid, Sodium Salt
TSCA: Butyric Acid, Sodium Salt (156-54-7) ----- Yes
SARA 302: Butyric Acid, Sodium Salt (156-54-7) - No SARA 313: Butyric Acid, Sodium Salt (156-54-7) - No
SARA 311/312: Acute: Yes; Chronic: No; Fire: No; Pressure: No; Reactivity: No (Pure / Solid)
Chemical Weapons Convention: No; TSCA 12(b): No; CDTA: No

Canada WHMIS: CLASS D-2B: Material causing other toxic effects (TOXIC).
Canada DSL: Butyric Acid, Sodium Salt (156-54-7)- Yes
Canada NDSL: Butyric Acid, Sodium Salt (156-54-7)- No

EINECS EC Number: 205-857-6
H315 = Causes skin irritation.
H319 = Causes serious eye irritation.
H335 = May cause respiratory irritation.
H341 = Suspected of causing genetic defects.
Xn = Harmful
R36/37/38 = Irritating to eyes, respiratory system and skin.
R68 = Possible risk of irreversible effects.

DISCLAIMER: The information and recommendations set forth herein (hereinafter "Information") are presented in good faith and believed correct as of the date hereof. It is compiled from various sources and it is not necessarily all inclusive nor fully adequate in every circumstance. In addition, these suggestions should not be confused with nor followed in violation of applicable laws, regulations, rules or insurance requirements applicable. This MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose.

Anmol Chemicals
S-8, SARIFA MANSION, 2ND FLANK ROAD, CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23770100, 23726950, 23774610, 23723564. FAX: 91-22-23728264

Exports to USA, Canada, UAE, Dubai, South Africa, Tanzania, Kenya, Nigeria, Egypt, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Europe Netherlands, Italy, Spain, Germany, Portugal, France, Malaysia, Indonesia, Thailand, Georgia, Korea, Japan, etc.